Owners Manual

8. Remove the screws that secure the Input/Output board.

9. Remove the Input/Output bracket.

Installing the Input/Output Board

1. Align the Input/Output board with the Input/Output bracket and tighten the

screws securing the Input/Output board.

2. Insert the Input/Output bracket into the slot on the chassis front.

3. Tighten the screws to secure the Input/Output bracket.

4. Connect the Input/Output board data cable to the system board.

5. Install the

drive cage

6. Install the

front bezel

7. Install the

cover

8. Follow the procedures in

After Working Inside Your Computer