Owners Manual

16. Remove the system board from the chassis.

Installing The System Board

1. Align the system board to the port connectors on the rear of the chassis,

and place the system board in the chassis.

2. Tighten the 7–mm hex screw to secure the system board to the chassis.

3. Tighten the screws to secure the system board to the chassis.

4. Thread the internal antenna into the chassis clips.

5. Connect the SATA cables, hard/optical drive power cable, system fan cable

and the control panel cable to the system board.

6. Install the

internal speaker

7. Install the

wireless module

8. Install the

front Input/Output panel

9. Install the

memory

10. Install the

heat sink

11. Install the

power supply