Owners Manual

Power Management

AC Recovery Determines how the system responds when AC power is re-

applied after a power loss. You can set the AC Recovery to:

•

Power Off (default)

• Power On

• Last State

Auto On Time Allows you to set the option to automatically turn on the

computer. Time is kept in standard 12-hour format

(hour:minutes:seconds). Change the startup time by typing the

values in the time and AM/PM fields.

NOTE: This feature does not work if you turn off your

computer using the switch on a power strip or surge

protector or if Auto Power is set to disabled.

Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.

•

Disabled

• Enabled in S5 only

• Enabled in S4 and S5

This option is Disabled by default.

Fan Control Override Controls the speed of the system fan. This option is disabled by

default.

NOTE: When enabled, the fan runs at full speed.

Wake on LAN This option allows the computer to power up from the off state

when triggered by a special LAN signal. Wake-up from the

Standby state is unaffected by this setting and must be

enabled in the operating system. This feature only works when

the computer is connected to AC power supply.

• Disabled — Does not allow the system to power on by

special LAN signals when it receives a wake-up signal

from the LAN or wireless LAN.

• LAN Only — Allows the system to be powered on by

special LAN signals.

This option is Disabled by default.