CLI Guide

Field Description
replay detection
support
Y: An SA has enabled the replay detection feature.
N: The replay detection feature is not enabled.
STATUS ACTIVE: The authentication or encryption policy is enabled on the interface.
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs) in detail.
Syntax
show ipv6 ospf [process-number] [vrf vrf-name] database [database-summary |
grace-lsa | external | inter-area-prefix | inter-area-router | intra-area-
prefix | link | network | router | nssa-external]
Parameters
process-number Enter the OSPF process number.
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display
neighbors corresponding to that VRF.
NOTE: If you do not specify this option, neighbors corresponding to the
default VRF are displayed.
database-
summary
(OPTIONAL) Enter the keyword database-summary to view a summary of
database LSA information.
external (OPTIONAL): Enter the keyword external to display the external link states.
grace-lsa
(OPTIONAL): Enter the keyword grace-lsa to display the Type-11 Grace LSAs
sent and received on an OSPFv3 router.
inter-area-prefix (OPTIONAL): Enter the keyword inter-area-prefix to display the inter area
prefix link states.
inter-area-router (OPTIONAL): Enter the keyword inter-area-router to display the inter area
router link states.
intra-area-prefix (OPTIONAL): Enter the keyword intra-area-prefix to display the intra area
prefix link states.
link (OPTIONAL): Enter the keyword link to display the link states.
network (OPTIONAL): Enter the keyword network to display the network link states.
nssa-external (OPTIONAL): Enter the keyword nssa-external to display the nssa link state
information.
router (OPTIONAL): Enter the keyword router to display the router link states.
Defaults None
Command Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14.1.0 The support to display detailed information of all the types of LSAs is introduced in
S4810 and S4820T.
9.13(0.0) Added support to display all the types of LSAs in detail.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
1130 Open Shortest Path First (OSPFv2 and OSPFv3)