CLI Guide

To remove the port bounce configuration, enter the no coa-bounce-port command.
Defaults Enabled.
Command Modes
● CONF-DYNAMIC-AUTH
Usage
Information
● Configure no coa-bounce-port to drop radius CoA port-bounce requests from the DAC.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.14(1.0) Introduced on the S4810 and S4820T.
9.13(0.0) Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000,
S6010–ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FN-IOM, and
MXL.
coa-disable-port
Configure NAS to reject disable-port requests from DAC.
Syntax
coa-disable-port
To undo this configuration, enter the no coa-disable-port command.
Defaults Enabled.
Command Modes
● CONF-DYNAMIC-AUTH
Usage
Information
● Configure no coa-disable-port DAS to drop radius CoA disable-port requests from DAC.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.14(1.0) Introduced on the S4810 and S4820T.
9.13(0.0) Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000,
S6010–ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FN-IOM, and
MXL.
coa-reauthenticate
Configure NAS to re-authenticate dot1x user session requests from DAC.
Syntax
coa-reauthenticate
To allow or reject re-authentication requests, enter the no coa-reauthenticate command.
Defaults Enabled.
Command Modes
● CONF-DYNAMIC-AUTH
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Security 1363