CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

781

782

783

784

785

786

787

788

789

790

Table Of Contents

To remove an IP host, use the no ipv6 host name {ipv6–address}.

Parameters

name

Enter a text string to associate with one IP address.

ipv6-address

Enter the IPv6 address (X:X:X:X::X) to be mapped to the name.

Defaults Not configured.

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S3148.

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.4.2.1 Introduced on the C-Series and S-Series.

8.4.1.0 Introduced on the E-Series.

ipv6 name-server

Enter up to six IPv6 addresses of name servers. The order you enter the addresses determines the order of their use.

Syntax

ipv6 name-server ipv6-address [ipv6-address2... ipv6-address6]

To remove a name server, use the no ipv6 name—server ipv6–address command.

Parameters

ipv6-address

Enter the IPv6 address (X:X:X:X::X) of the name server to be used.

Note: The :: notation specifics successive hexadecimal fields of zeros.

ipv6-address2...

ipv6-address6

(OPTIONAL) Enter up to five more IPv6 addresses, in the x:x:x:x::x format, of name

servers to be used. Separate the IPv6 addresses with a space.

Defaults None