Glossary

Command
History
Version Description
9.11.3.0 Introduced on the Z9100-ON, S4048-ON, S6000-ON, S6100-ON, S4048T-ON,
S3100, S6010-ON, S3048-ON, and C9010.
Related
Commands
show ipv6 pim tib – displays the IPv6 PIM tree information base (TIB)
debug ipv6 pim
Invoke IPv6 PIM debugging.
Syntax
debug ipv6 pim [vrf vrf-name] [bsr | events | group [group] | packet [in
| out] | register [group] | state | timer [assert | hello | joinprune |
register]]
To disable IPv6 PIM debugging, use the no debug ipv6 pim [vrf vrf-name] command.
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to view IP
PIM debugging messages corresponding to that VRF.
NOTE: Applies to specific VRF if input is provided, else applies to Default VRF.
bsr (OPTIONAL) Enter the keyword bsr to invoke debugging of IPv6 PIM Candidate
RP/BSR activities.
events (OPTIONAL) Enter the keyword events to invoke debugging of IPv6 PIM events.
group [ group ] (OPTIONAL) Enter the keyword group followed by the group address to invoke
debugging on that specific group.
packet (OPTIONAL) Enter the keyword packet to invoke debugging of IPv6 PIM packets.
register [ group ] (OPTIONAL) Enter the keyword register and optionally the group address to
invoke debugging of IPv6 PIM register messages for a particular group.
state (OPTIONAL) Enter the keyword state to view IPv6 PIM state changes.
timer [assert |
hello | joinprune |
register]
(OPTIONAL) Enter the keyword timer to view IPv6 PIM timers. Enter one of the
optional parameters:
● assert: to view the assertion timer
● hello: to view the IPv6 PIM neighbor keepalive timer
● joinprune: to view the expiry timer (join/prune timer)
● register: to view the register suppression timer
Defaults Disabled.
Command Modes EXEC Privilege
Command
History
Version Description
9.11.3.0 Introduced on the Z9100-ON, S4048-ON, S6000-ON, S6100-ON, S4048T-ON,
S3100, S6010-ON, S3048-ON, and C9010.
ipv6 pim bsr-border
Define the border of IPv6 PIM domain by filtering inbound and outbound PIM-BSR messages per interface.
Syntax
ipv6 pim bsr-border
To return to the default value, use the no ipv6 pim bsr-border command.
Defaults Disabled.
1216 PIM-Sparse Mode (PIM-SM)