Glossary

ManualsBrandsDell ManualsAccess PlatformsOS9

1431

Table Of Contents

To disable password-authentication, use the no ip ssh password-authentication enable

command.

Parameters

enable Enter the keyword enable to enable password-authentication for the SSH server.

Defaults Enabled

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

Usage

Information

With password authentication enabled, you can authenticate using the local, RADIUS, or TACACS+

password fallback order as configured.

ip ssh pub-key-file

Specify the file used for host-based authentication.

Syntax

ip ssh pub-key-file {WORD}