Glossary

Example — Reset
reason of a single
stack unit
DellEMC# show reset-reason stack-unit 1
Cause : Reset by User through CLI command
Reset Time: 11/05/2017-08:36
Example — Reset
reason of all
stack units
DellEMC#show reset-reason stack-unit all
Last Reset Reason:
---------------------
Type Cause Time
-----------------------------------------------------------------------------------
stack-unit 1 Reboot by Software 11/05/2017-09:04
stack-unit 2 Reboot by Software 11/05/2017-09:04
stack-unit 3 Cold Reset N/A
stack-unit 4 N/A N/A
stack-unit 5 N/A N/A
stack-unit 6 N/A N/A
show software ifm
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface |
stack-unit unit-ID | trace-flags}
Parameters
clients Enter the keyword clients to display IFM client information.
summary (OPTIONAL) Enter the keyword summary to display brief information about IFM
clients.
ifagt number Enter the keyword ifagt then the number of an interface agent to display
software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface IDs then the interface
information to display interface control block information for that interface:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport[/subport] information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
stack-unit unit-
ID
Enter the keyword stack-unit then the stack member number to display IFM
information for that unit.
trace-flags Enter the keyword trace-flags to display IFM information for internal trace
flags.
Defaults None.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
150 Control and Monitoring