Glossary

ManualsBrandsDell ManualsAccess PlatformsOS9

321

322

323

324

325

326

327

328

329

330

Table Of Contents

Attaching an ACL individually to VLAN interfaces is similar to the behavior of ACL-VLAN mapping storage

in CAM prior to the implementation of the ACL VLAN group functionality.

ip access-group

Apply an egress IP ACL to the ACL VLAN group.

Syntax

ip access-group {group name} out implicit-permit

Parameters

group-name

Enter the name of the ACL VLAN group where you want the egress IP ACLs

applied, up to 140 characters.

out Enter the keyword out to apply the ACL to outgoing traffic.

implicit-permit

Enter the keyword implicit-permit to change the default action of the ACL

from implicit-deny to implicit-permit (that is, if the traffic does not match the

filters in the ACL, the traffic is permitted instead of dropped).

Default None

Command Modes CONFIGURATION (conf-acl-vl-grp)

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.3.(0.0) Introduced on the S4810, S4820T, and Z9000 platforms.

Usage

Information

You can apply only an egress IP ACL on an ACL VLAN group.

show acl-vlan-group

Display all the ACL VLAN groups or display a specific ACL VLAN group, identified by name.

Syntax

show acl-vlan-group {group-name | detail}

Parameters

group-name

(Optional) Display only the ACL VLAN group that is specified, up to 140 characters.

detail

Display information in a line-by-line format to display the names in their entirety.

Without the detail option, the output displays in a table style and information may

be truncated.

Default No default behavior or values

Command Modes

EXEC

EXEC Privilege