Install Guide

Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage
Information
trust dot1p, do1p-priority, service-class dynamic dot1; all these features work over the mapping in this
command output.
Related
Commands
● service-class dot1p-mapping — Identifies the class map.
wred enable
Enable weighted random early detection (WRED) globally.
Syntax
wred enable
To disable WRED globally, use the no wred enable command.
Defaults Enabled
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.12(0.0) Introduced on the S6000, S6100–ON, and Z9100–ON.
Usage
Information
By default, WRED is enabled on the system. To disable it globally, use the no WRED enable command.
The system does not show the WRED enable command in the running-configuration or startup-
configuration. The system writes this configuration to the running-configuration or startup-configuration
only when you use the no WRED enable command.
Related
Commands
● wred-profile — creates a WRED profile and name that profile.
1230 Quality of Service (QoS)