Install Guide

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Usage
Information
This command is available with or without RBAC enabled. When RBAC is enabled you can restrict access
to audit and security logs based on the CLI sessions’ user roles. If extended logging is disabled, you can
only view system events, regardless of RBAC user role.
When you enabled RBAC and extended logging:
● Only the system administrator role can execute this command.
● The system administrator and system security administrator roles can view security events and system
events.
● The system administrator role can view audit, security, and system events.
●
The network administrator and network operator roles can view system events.
Examples
DellEMC(conf)#logging extended
Related
Commands
● show logging auditlog — display the audit log.
● clear logging auditlog— clear the audit log.
logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
Parameters
facility-type (OPTIONAL) Enter one of the following parameters:
● auth (authorization system)
● cron (Cron/at facility)
● deamon (system deamons)
● kern (kernel)
● local0 (local use)
● local1 (local use)
● local2 (local use)
● local3 (local use)
● local4 (local use)
● local5 (local use)
● local6 (local use)
● local7 (local use)
● lpr (line printer system)
● mail (mail system)
● news (USENET news)
● sys9 (system use)
● sys10 (system use)
● sys11 (system use)
● sys12 (system use)
● sys13 (system use)
● sys14 (system use)
● syslog (Syslog process)
1496
Simple Network Management Protocol (SNMP) and Syslog