Install Guide

<0.1-65535.6553
5>
Enter <0.1-65535.65535> to clear peers with the AS number in dot format.
A.B.C.D Enter the BGP neighbor address in the A.B.C.D format to clear.
X:X:X:X::X Enter the BGP neighbor address in the X:X:X:X::X format to clear.
soft (OPTIONAL) Enter the keyword soft to configure and activate policies without
resetting the BGP TCP session, that is, BGP Soft Reconfiguration.
NOTE: If you enter the clear ip bgp ip-address soft command,
both inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound policies.
NOTE: You must execute the clear ip bgp soft out command when
ever there is a change in the local policy. If you do not run this command
after a local policy change, then these policy changes are not reflected in the
responses to the peer’s route refresh messages.
dampening Enter the keyword dampening to clear the flap dampening information.
flap-statistics Enter the keywords flap-statistics to clear the flap statistics information.
ipv4 Enter the ipv4 address family to clear.
ipv6 Enter the ipv6 address family to clear.
peer-group Enter the peer-group to clear all members of the peer-group.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
6.5.1.0 Expanded to include the as-number option.
360 Border Gateway Protocol