Install Guide

3 CPUTYPEDETECTTEST Level0
4 CPUSDRAMPRESENCETEST Level0
5 CPUSDRAMSIZETEST Level0
6 CPLDBOARDTYPETEST Level0
7 I2CACCESSTEST Level0
8 PSUPRESENCETEST Level0
9 PSUSOURCETYPETEST Level0
10 PSUSTATUSMONITORTEST Level0
11 PSUFANSPEEDMONITORTEST Level0
12 PSUFANSTATUSMONITORTEST Level0
13 PSUFANAIRFLOWTYPETEST Level0
14 FANTRAYPRESENCETEST Level0
15 FANSTATUSMONITORTEST Level0
16 FANAIRFLOWTYPETEST Level0
17 RTCPRESENCETEST Level0
18 SSDPRESENCETEST Level0
[output truncated]
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced the verbose option.
7.7.1.0 Introduced on the S-Series.
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
clear hardware stack-unit
Clear statistics from selected hardware components.
Syntax
clear hardware stack-unit id {counters | cpu {data-plane statistics | i2c
statistics | management statistics | party-bus statistics | sata-interface
statistics} | unit number counters | stack-port stack-port-number}
Parameters
stack-unit id Enter the keywords stack-unit then a number to select a particular stack
member and then enter one of the following command options to clear a specific
collection of data. The range is from 1 to 6.
counters Enter the keyword counters to clear the counters on the selected stack member.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to clear the data plane
statistics.
cpu i2c statistics Enter the keywords cpu i2c statistics to clear the i2c devices statistics.
506 Debugging and Diagnostics