Service Manual

6 drwx 4096 Aug 09 2015 06:56:32 +00:00 CONFD_LOG_DIR
7 drwx 4096 Aug 09 2015 06:56:32 +00:00 CORE_DUMP_DIR
8 drwx 4096 Aug 09 2015 06:56:32 +00:00 RUNTIME_PATCH_DIR
9 -rwx 53285 Sep 01 2015 18:08:54 +00:00 TestReport-SU-1.txt
10 -rwx 630 Sep 02 2015 17:53:14 +00:00 TestReportIndividual-SU-1.txt
11 -rwx 2760 Sep 04 2015 18:51:26 +00:00 startup-config
12 -rwx 294418 Sep 04 2015 18:51:36 +00:00 confd_cdb.tar.gz
13 -rwx 54238335 Sep 06 2015 13:04:58 +00:00 FTOS-S6100-ON-9.10.0.0.bin
flash: 4286574592 bytes total (4170424320 bytes free)
View Configuration Files
Configuration files have three commented lines at the beginning of the file, as shown in the following example, to help you
track the last time any user made a change to the file, which user made the changes, and when the file was last saved to the
startup-configuration.
In the running-configuration file, if there is a difference between the timestamp on the “Last configuration change” and
“Startup-config last updated,” you have made changes that have not been saved and are preserved after a system reboot.
Example of the show running-config Command
DellEMC#show running-config
Current Configuration ...
! Version 9.10(0.0)
! Last configuration change at Sun Sep 6 12:41:09 2015 by default
!
boot system stack-unit 1 primary system: B:
boot system stack-unit 1 secondary system: A:
boot system stack-unit 1 default system: A:
boot system gateway 10.16.200.254
Managing the File System
The Dell EMC Networking system can use the internal Flash, external Flash, or remote devices to store files.
The system stores files on the internal Flash by default but can be configured to store files elsewhere.
To view file system information, use the following command.
● View information about each file system.
EXEC Privilege mode
show file-systems
The output of the show file-systems command in the following example shows the total capacity, amount of free memory,
file structure, media type, read/write privileges for each storage device in use.
DellEMC#show file-systems
Size(b) Free(b) Feature Type Flags Prefixes
4286574592 4170424320 FAT32 USERFLASH rw flash:
- - unformatted USERFLASH rw fcmfs:
2032525312 590807040 Unknown NFSMOUNT rw nfsmount:
- - - network rw ftp:
- - - network rw tftp:
- - - network rw scp:
- - - network rw http:
You can change the default file system so that file management commands apply to a particular device or memory.
To change the default directory, use the following command.
● Change the default directory.
EXEC Privilege mode
cd directory
Getting Started
51