Setup Guide

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Usage
Information
To make the HTTP clients VRF-aware, use the ip http vrf command. The HTTP client uses the VRF
name that you specify to reach the HTTP server. If you do not specify a VRF name, the HTTP client uses
the default VRF.
ip ftp password
Specify a password for outgoing FTP connections.
Syntax
ip ftp password [encryption-type] password
To remove a password and return to the default setting, use the no ip ftp password [password]
command.
Parameters
encryption-type (OPTIONAL) Enter one of the following numbers:
● 0 (zero) for an unecrypted (clear text) password
● 7 (seven) for a hidden text password
password Enter a string up to 40 characters as the password.
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
The password is listed in the configuration file; you can view the password by entering the show
running-config ftp command.
Control and Monitoring 103