Setup Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1131

Table Of Contents

destination-port-

range

Enter the keywords destination-port-range then the range of the start port

to end port to be matched in the ACL rule in the ICAP rule.

Defaults none

Command Modes REDIRECT-LIST

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Added support for the track-id on the S4810, S4820T, S6000, S6000-ON, and

Z9000.

9.5(0.1) Introduced on the Z9500.

9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.

show cam pbr

Display the PBR CAM content.

Syntax

show cam pbr {interface interface | stack—unit slot-number port-set number

[pipeline number]} [summary]

Parameters

interface

Enter the keyword interface then the name of the interface.

stack–unit

number

Enter the keyword stack-unit then the slot number.

port-set