Setup Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

921

922

923

924

925

926

927

928

929

930

Table Of Contents

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.1 Introduced on the S4810.

6.2.1.1 Introduced

clear ip msdp sa-cache

Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or local source-active

entries.

Syntax

clear ip msdp sa-cache [group-address | rejected-sa | local]

Parameters

group-address

Enter the group IP address in dotted decimal format (A.B.C.D.).

rejected-sa Enter the keywords rejected-sa to clear the cache source-active entries that

are rejected because the RPF check failed, an SA filter or limit is configured, the

RP or MSDP peer is unreachable, or because of a format error.

local Enter the keyword local to clear out local PIM advertised entries. It applies the

redistribute filter (if present) while adding the local PIM SA entries to the SA

cache.

Defaults Without any options, this command clears the entire source-active cache.

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.