White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

1051

Table Of Contents

Parameters

broadcast Enter the keyword broadcast to designate the interface as part of a broadcast

network.

point-to-point Enter the keywords point-to-point to designate the interface as part of a

point-to-point network.

Defaults Broadcast.

Command Modes ROUTER OSPF

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Added support for Multi-Process OSPF.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre- 6.1.1.1 Introduced on the E-Series.

ip ospf priority

To determine the designated router for the OSPF network, set the priority of the interface.

Syntax

ip ospf priority number

To return to the default setting, use the no ip ospf priority command.

Parameters

number

Enter a number as the priority. The range is from 0 to 255. The default is 1.

Defaults 1

Command Modes INTERFACE