White Papers

The following is sample output of the show login statistics unsuccessful-attempts user
login-id command.
DellEMC# show login statistics unsuccessful-attempts user admin
There were 3 unsuccessful login attempt(s) for user admin in last 12
day(s).
The following is sample output of the show login statistics successful-attempts
command.
DellEMC#show login statistics successful-attempts
There were 4 successful login attempt(s) for user admin in last 30
day(s).
Related
Commands
● login statistics — enable and configure user login statistics on console and virtual terminal lines.
● login concurrent-session — configures the limit of concurrent sessions for each user on console and
virtual terminal lines.
show memory
View current memory usage on the switch.
Syntax
show memory [stack-unit id]
Parameters
stack-unit id (OPTIONAL) Enter the keyword stack-unit then the stack unit ID to display
memory information on the designated stack member.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced this version of the command for the S-Series.
Usage
Information
The output for show memory displays the memory usage of LP part (sysdlp) of the system. The sysdlp
is an aggregate task that handles all the tasks running on the S-Series’ CPU.
Control and Monitoring 133