White Papers

Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
DellEMC#
show ip route
View information, including how they were learned, about the IP routes on the switch.
Syntax
show ip route [vrf vrf-name] hostname | ip-address [mask] [longer-prefixes]
| list prefix-list | protocol [process-id | routing-tag] | all | connected
| static | summary]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the VRF name to list the routes in
the route table of a specific VRF.
ip-address (OPTIONAL) Specify a name of a device or the IP address of the device to view
more detailed information about the route.
mask (OPTIONAL) Specify the network mask of the route. Use this parameter with the
IP address parameter.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a
common prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a configured prefix list. For
more information, refer to the show ip route list command.
protocol (OPTIONAL) Enter the name of a routing protocol (bgp, isis, ospf, rip) or the
keywords connected or static.
NOTE: bgp, isis, ospf, and rip.
● If you enter bgp, you can include the BGP as-number .
● If you enter isis, you can include the ISIS routing-tag.
● If you enter ospf, you can include the OSPF process-id.
process-id (OPTIONAL) Specify that only OSPF routes with a certain process ID must be
displayed.
routing-tag (OPTIONAL) Specify that only ISIS routes with a certain routing tag must be
displayed.
connected (OPTIONAL) Enter the keyword connected to view only the directly connected
routes.
all (OPTIONAL) Enter the keyword all to view both active and non-active routes.
static (OPTIONAL) Enter the keyword static to view only routes the ip route
command configures.
summary (OPTIONAL) Enter the keyword summary. For more information, refer to the show
ip route summary command.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
IPv4 Routing 753