CLI Guide

Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information
To isolate problems with inter-area and external routes, use this command. In OSPF inter-area and
external routes are calculated by adding LSA cost to the cost of reaching the router. If an inter-area or
external route is not of correct cost, the display can determine if the path to the originating router is
correct or not.
Example
summary-address
To advertise one external route, set the OSPF ASBR.
Syntax
summary-address ip-address mask [not-advertise] [tag tag-value]
To disable summary address, use the no summary-address ip-address mask command.
Parameters
ip-address Specify the IP address in dotted decimal format of the address to summarize.
mask Specify the mask in dotted decimal format of the address to summarize.
not-advertise (OPTIONAL) Enter the keywords not-advertise to suppress that match the
network prefix/mask pair.
tag tag-value (OPTIONAL) Enter the keyword tag then a value to match on routes redistributed
through a route map. The range is from 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1115