CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1631

Table Of Contents

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.

Usage

Information

Specify the matching criteria only after defining a route-map. Before using this command, you must enter

Route Map mode using the route-map route-map-name command. The match criteria that you

specify is associated with the route-map that you define.

The export-target and import-target options support only the match protocol and match prefix-list

options. Other options that you configure in the route-maps are ignored.

Commands

● ipv6 route-import – imports IPv6 routes from another VRF.

redistribute

Redistributes leaked or exported routes corresponding to specific protocols.

Syntax

redistribute {imported-bgp | import-ospf | import-isis}

Parameters

imported-bgp Enter the keywords imported-bgp to redistribute leaked routes that are learned

using the BGP protocol.

imported-ospf Enter the keywords imported-ospf to redistribute leaked routes that are

learned using the OSPF protocol.

imported-isis Enter the keywords imported-isis to redistribute leaked routes that are

learned using the ISIS protocol.

route-map Enter the name of the route-map to specify the filtering criteria for imported

routes.

Command Modes

CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.