CLI Guide

Usage
Information
This command enables a hardware watchdog mechanism that automatically reboots a Dell EMC
Networking OS switch or router with a single unresponsive unit. This behavior is a last-resort mechanism
that is intended to prevent a manual power cycle.
show hardware mac
Display MAC ACL entries for the specified stack-unit, port-pipe and pipeline ID.
Syntax
show hardware mac {eg-acl | in-acl} stack-unit id port-set 0–0 pipeline
pipeline-number
Parameters
eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to select between
ingress or egress ACL data.
stack- unit id Enter the keyword stack-unit to select the stack unit ID.
port-set 0–0 Enter the keywords port-set with a port-pipe number to display the MAC ACL
entries for the specified port-pipe number. . The range is from 0 to 0.
pipeline pipeline-
number
Enter the keyword pipeline with a pipeline number to display the MAC ACL
entries specific to the pipeline number. The range is from 0 to 3.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Usage
Information
The unit numbers given are internal port numbers.
show hardware ip
Display ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer3 {acl | qos} stack-unit number port-set 0–0 pipeline
pipeline-number
512 Debugging and Diagnostics