Users Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Obscure Password Commands
To enable the obscure password, use the following commands.
service obscure-passwords
Enable the obscuring of passwords and keys.
Syntax
service obscure-passwords
Enable the obscuring of passwords and keys, including RADIUS, TACACS+ keys, router authentication
strings, VRRP authentication, use the service obscure-passwords command.
Defaults Disabled.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0) Introduced on the S4810, S4820T, S5000, S6000, Z9000, Z9500, MXL
Usage
Information
By default, the service password-encryption command stores encrypted passwords. For greater
security, you can also use the service obscure-passwords command to prevent a user from
reading the passwords and keys, including RADIUS, TACACS+ keys, router authentication strings, VRRP
1364 Security