Users Guide

Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Example
DellEMC(conf)# radius-server group group1
DellEMC(conf-radius-group)# radius-server host 1.1.1.1 key secret
DellEMC(conf-radius-group)# radius-server host 2.2.2.2 key secret
DellEMC(conf-radius-group)# radius-server vrf vrf1 source-interface
twentyFiveGigE 1/45
DellEMC(conf-radius-group)# show config
!
radius-server group group1
radius-server vrf vrf1 source-interface twentyFiveGigE 1/45
radius-server host 1.1.1.1 key 7 9a2f3ec0c65c6f41
radius-server host 2.2.2.2 key 7 9a2f3ec0c65c6f41
DellEMC(conf-radius-group)#
Related
Commands
● login authentication — sets the database to be checked when a user logs in.
● radius-server key — sets an authentication key for RADIUS communications.
● radius-server retransmit — sets the number of times the RADIUS server attempts to send
information.
● radius-server timeout — sets the time interval before the RADIUS server times out.
radius-server host
Configure a RADIUS server host.
Syntax
radius-server host {hostname | ipv4-address | ipv6-address} [auth-port
port-number] [acct-port port-number] [retransmit retries] [timeout seconds]
[key [encryption-type] key]
Parameters
hostname Enter the name of the RADIUS server host.
ipv4-address |
ipv6-address
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X) of the RADIUS
server host.
auth-port port-
number
(OPTIONAL) Enter the keywords auth-port then a number as the port number.
The range is from zero (0) to 65535. The default port-number is 1812.
acct-port port-
number
(OPTIONAL) Enter the keywords acct-port then a number as the port number.
The range is from 1 to 65535. The default port-number is 1813.
retransmit
retries
(OPTIONAL) Enter the keyword retransmit then a number as the number of
attempts. This parameter overwrites the radius-server retransmit
command. The range is from zero (0) to 100. The default is 3 attempts.
timeout seconds (OPTIONAL) Enter the keyword timeout then the seconds the time interval the
switch waits for a reply from the RADIUS server. This parameter overwrites the
Security 1387