Users Guide
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-
Mux (PMUX) mode only.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
Syslog messages contain the IP address of the interface used to egress the router. By configuring the
logging source-interface command, the Syslog packets contain the IP address of the interface
configured.
Related
Commands
● logging — enables logging to the Syslog server.
logging synchronous
Synchronize unsolicited messages and Dell EMC Networking OS output.
Syntax
logging synchronous [level level | all] [limit number-of-buffers]
To disable message synchronization, use the no logging synchronous [level level | all]
[limit number-of-buffers] command.
Parameters
all Enter the keyword all to ensure that all levels are printed asynchronously.
level
level
Enter the keyword level then a number as the severity level. A high number
indicates a low severity level and vice versa. The range is from 0 to 7. The default is
2.
all Enter the keyword all to turn off all.
limit
number-of-
buffers
Enter the keyword limit then the number of buffers to be queued for the
terminal after which new messages are dropped. The range is from 20 to 300. The
default is 20.
Defaults Disabled. If enabled without the level or number-of-buffers options specified, level = 2 and
number-of-buffers = 20 are the defaults.
Command Modes LINE
1514 Simple Network Management Protocol (SNMP) and Syslog