White Papers

Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information
The following describes the show ip ospf statistics process-id global command shown in
the following example.
Row Heading Description
Total Displays the total number of packets the OSPF process receives/transmits.
Error Displays the error count while receiving and transmitting packets by the OSPF
process.
Hello Number of OSPF Hello packets.
DDiscr Number of database description packets.
LSReq Number of link state request packets.
LSUpd Number of link state update packets.
LSAck Number of link state acknowledgement packets.
TxQ-Len The transmission queue length.
RxQ-Len The reception queue length.
Tx-Mark The highest number mark in the transmission queue.
Rx-Mark The highest number mark in the reception queue.
Hello-Q The queue, for transmission or reception, for the hello packets.
LSR-Q The queue, for transmission or reception, for the link state request packets.
Other-Q The queue, for transmission or reception, for the link state acknowledgement,
database description, and update packets.
The following describes the error definitions for the show ip ospf statistics process-id
global command.
Error Type
Description
Intf_Down Received packets on an interface that is either down or OSPF is not enabled.
1102 Open Shortest Path First (OSPFv2 and OSPFv3)