White Papers

Parameters
tag (OPTIONAL) The tag you specify identifies a specific area routing process. If you
do not specify a tag, a null tag is assigned.
Defaults No processes are configured.
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Introduced.
Usage
Information
To assign a network entity title to enable IS-IS, use the net command.
This command accepts even if an IP address is not configured. This command is cached in the L3
Manager till the IP address is configured. When the IP address configuration reaches the L3Manager, the
circuit add message is sent to IS-IS.
NOTE: IP address is not mandatory for forming IS-IS adjacency.
Related
Commands
● net — configure an IS-IS network entity title (NET) for the routing process.
● router isis — enable the IS-IS routing protocol.
ipv6 router isis
Enable the IPv6 IS-IS routing protocol and specify an IPv6 IS-IS process.
Syntax
ipv6 router isis [tag]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
tag (OPTIONAL) This parameter is a unique name for a routing process. A null tag is
assumed if the tag option is not specified. The tag name must be unique for all IP
router processes for a given router.
Defaults Not configured.
Command Modes ROUTER ISIS
Command
History
s
Intermediate System to Intermediate System (IS-IS) 831