White Papers

Version Description
9.11(3.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld last-member-query-interval
Change the MAX Response Time inserted into the Group-Specific Queries sent in response to a Leave Group messages. This
interval is also the interval between Group-Specific Query messages.
Syntax
ipv6 mld last-member-query-interval {milliseconds}
To return to the default, use the no ipv6 mld last-member-query-interval
{milliseconds} command.
Parameters
milliseconds Enter the last member query interval in milliseconds. The range is from 100 to
65535.
Defaults 1000 milliseconds.
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(3.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld query-interval
Change the transmission frequency of the MLD host.
Syntax
ipv6 mld query-interval [seconds]
To return to the default interval, use the no ipv6 mld query-interval command.
Parameters
seconds Enter the interval in seconds. The range is from 1 to 18000.
Defaults 60 seconds.
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(3.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld query-max-resp-time
Set the maximum query response time advertised in the general queries.
Syntax
ipv6 mld query-max-resp-time {seconds}
To return to the default, use the no ipv6 mld query-max-resp-time command.
962 Multicast Listener Discovery Protocol