Administrator Guide

mac [source-mac | source-port-id | source-module-id | dest-mac | dest-port-
id | dest-module-id | vlan | ethertype | source-dest-mac ] | tunnel [ipv4-
over-ipv4 | ipv4-over-gre-ipv4 | mac-in-mac]}
Parameters
{{ip-selection|
ipv6-selection
[ source-ip |
source-ipv6 |
source-port-id |
source-module-id
| dest-ip | dest-
ipv6 | dest-port-
id | dest-module-
id
| protocol |
vlan | L4-source-
port | L4-dest-
port ]
To use IPv4 key fields in hash computation, enter the keyword ip-selection
then one of the parameters. To use IPv6 key fields in hash computation, enter the
keyword ipv6-selection then one of the parameters.
● source-ip — Use IPv4 src-ip field in hash calculation.
● source-ipv6 — Use IPv6 src-ip field in hash calculation
● source-port-id — Use src-port-id field in hash calculation.
● source-module-id — Use src-module-id field in hash calculation.
● dest-ip — Use IPv4 dest-ip field in hash calculation.
● dest-ipv6 — Use IPv6 dest-ip field in hash calculation
● dest-port-id — Use dest-port-id field in hash calculation.
● dest-module-id — Use dest-module-id field in hash calculation.
● protocol — Use IPv4 protocol field in hash calculation.
● vlan — Use vlan field in hash calculation.
● L4-source-port — Use IPv4 L4-source-port field in hash calculation.
● L4-dest-port — Use IPv4 L4-dest-port field in hash calculation.
mac [ source-mac
| source-port-id
| source-module-
id | dest-mac
| dest-port-id |
dest-module-id |
vlan | ethertype
| source-dest-
mac ]
To use MAC key fields in hash computation, enter the keyword mac then one of
the parameters:
● source-mac — Use source-mac field in hash calculation.
● source-port-id — Use src-port-id field in hash calculation.
● source-module-id — Use src-module-id field in hash calculation.
● dest-mac — Use dest-mac field in hash calculation.
● dest-port-id — Use dest-port-id field in hash calculation.
● dest-module-id — Use dest-module-id field in hash calculation.
● vlan — Use vlan field in hash calculation .
● ethertype — Use Ethertype field in hash calculation.
● source-dest-mac — Use SMAC and DMAC fields in hash calculation.
tunnel [ ipv4-
over-ipv4 | ipv4-
over-gre-ipv4 |
mac-in-mac ]}
To use tunnel key fields in hash computation, enter the keyword tunnel then one
of the parameters:
● ipv4-over-ipv4 — Use ipv4-over-ipv4 field in hash calculation.
● ipv4-over-gre-ipv4 — Use ipv4-over-gre-ipv4 field in hash calculation.
● mac-in-mac — Use mac-in-mac field in hash calculation.
Defaults IP selection 5-tuples (source-ip dest-ip vlan protocol L4-source-port L4-dest-port).
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Added support for IPv6.
744 IPv4 Routing