CLI Guide

ip ospf mtu-ignore
Disable OSPF MTU mismatch detection upon receipt of database description (DBD) packets.
S3048–ON
Syntax
ip ospf mtu-ignore
To return to the default, use the no ip ospf mtu-ignore command.
Defaults Enabled.
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
ip ospf network
Set the network type for the interface.
S3048–ON
Syntax
ip ospf network {broadcast | point-to-point}
To return to the default, use the no ip ospf network command.
Parameters
broadcast Enter the keyword broadcast to designate the interface as part of a broadcast
network.
point-to-point Enter the keywords point-to-point to designate the interface as part of a
point-to-point network.
Defaults Broadcast.
Command Modes ROUTER OSPF
Open Shortest Path First (OSPFv2 and OSPFv3) 1047