CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1611

Table Of Contents

ip http vrf

Configure an HTTP client with a VRF used to connect to the HTTP server.

Syntax

ip http vrf {management | vrf-name}

To undo the HTTP client configuration, use the ip http vrf command.

Parameters

management Enter the keyword management for configuring the management VRF that uses

an HTTP client.

vrf-name

Enter a VRF name that the HTTP client uses. If you do not specify a VRF name, the

HTTP client uses the default VRF.

Defaults Disabled

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.

Usage

Information

To make the HTTP clients VRF-aware, use the ip http vrf command. The HTTP client uses the VRF

name that you specify to reach the HTTP server. If you do not specify a VRF name, the HTTP client uses

the default VRF.

description

Specify a name for a customer VRF.

Syntax

description string

To delete the descriptive name for a customer VRF, use the no description string command.

Parameters

string

Enter a descriptive name for the VRF.

Defaults None.

Command Modes VRF MODE