CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

501

502

503

504

505

506

507

508

509

510

Table Of Contents

Defaults 24 hours

Command Modes DHCP <POOL>

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the C-Series and S-Series.

netbios-name-server

Specify the NetBIOS Windows Internet Naming Service (WINS) name servers, in order of preference, that are available to

Microsoft Dynamic Host Configuration Protocol (DHCP) clients.

Syntax

netbios-name-server address [address2...address8]

Parameters

address

Enter the address of the NETBIOS name server. You may enter up to eight, in order

of preference.

Defaults None