Deployment Guide

Example
(Summary)
DellEMC# show arp summary
TotalEntries Static Entries Dynamic Entries CPU
----------------------------------------------
83 0 83 CP
DellEMC#
Related
Commands
● ip local-proxy-arp — enable/disable Layer 3 communication in secondary VLANs.
● switchport mode private-vlan — set PVLAN mode of the selected port.
show arp retries
Display the configured number of ARP retries.
Syntax
show arp retries
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced.
Related
Commands
● arp retries — set the number of ARP retries in case the system does not receive an ARP reply in
response to an ARP request.
show hosts
View the host table and DNS configuration.
Syntax
show hosts
Command Modes
● EXEC
IPv4 Routing 771