Deployment Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Added IPv6 ISIS support.
6.3.1.0 Introduced.
Usage
Information
When you use this command to redistribute routes into a routing domain, the router becomes an
autonomous system (AS) boundary router. An AS boundary router does not always generate a default
route into a routing domain. The router still requires its own default route before it can generate one.
How a metric value assigned to a default route advertises depends on the metric-style command
configuration. If the metric-style command is set for Narrow mode and the metric value in the
default-information originate command is set to a number higher than 63, the metric value
advertised in the LSPs is 63. If the metric-style command is set for Wide mode, the metric value in
the default-information originate command is advertised.
Related
Commands
● redistribute — redistribute routes from one routing domain to another routing domain.
description
Enter a description of the IS-IS routing protocol.
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description Enter a description to identify the IS-IS protocol (80 characters maximum).
Defaults None
Command Modes ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Intermediate System to Intermediate System (IS-IS) 825