Release Notes
Table Of Contents
- Dell S6100–ON System Release Notes, OS Version 9.14(2.10)
- Document Revision History
- Requirements
- New Dell Networking OS Version 9.14(2.10) Features
- Restrictions
- Changes to the Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the ONIE Package for the S6100-ON System
- Upgrading the DIAG Package for the S6100-ON System
- Installing Dell EMC Networking OS on the S6100-ON using ONIE
- Upgrading the S6100-ON Dell EMC Networking OS Image using Dell EMC Networking OS CLI
- Upgrade the Boot Selector and Boot Flash Images from Dell EMC Networking OS
- Upgrade the CPLD Images
- Upgrading the SmartFusion Microcontroller Subsystem — SMF MSS-IAP
- Upgrading the SmartFusion Microcontroller Subsystem — SMF MSS-FPGA
- Upgrading the OOB-FPGA Image
- Uninstalling the Dell EMC Networking OS
- Installing a Third Party Operating System
- Contacting Dell EMC
EXEC Privilege Mode
reload
3. Upgrade the Dell EMC Networking OS GRUB.
EXEC Privilege Mode
upgrade boot bootflash-image stack-unit <stack–unit–id> booted
Current Boot information in the system:
========================================================================
Card BootFlash Current Version New Version
------------------------------------------------------------------------
Unit1 Boot Flash 3.25.2.11 3.25.2.14
***********************************************************************
* Warning - Upgrading boot flash is inherently risky and should only *
* be attempted when necessary. A failure at this upgrade may cause *
* a board RMA. Proceed with caution ! *
***********************************************************************
Proceed upgrade Boot Flash image for stack-unit 1 [yes/no]: yes
!!!!!
Bootflash image upgrade for stack-unit 1 completed successfully.
DellEMC#
4. Reload the unit.
EXEC Privilege Mode
reload
5. Verify whether the upgrade is successful.
DellEMC#show system stack-unit 1
-- Unit 1 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : S6100-ON - 4 Modules, 16x40G/8x100G ports TE/TF/FO/FI/HU
G
Current Type : S6100-ON - 4 Modules, 16x40G/8x100G ports TE/TF/FO/FI/HU
G
Master priority : NA
Hardware Rev : 0.0
Num Ports : 130
Up Time : 4 min, 47 sec
Dell EMC Networking OS Version : 9.14(2.10)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : 3.25.2.14
Boot Selector : 3.25.0.0-6
Memory Size : 3177226240 bytes
Temperature : 28C
Voltage : ok
Serial Number : NA
Part Number : 0WKFYN Rev X02
Vendor Id : NA
Date Code : NA
Country Code : NA
Piece Part ID : CN-0WKFYN-77931-58K-0004
PPID Revision : X02
Service Tag : 21VRG02
Expr Svc Code : 446 737 939 4
Auto Reboot : enabled
Burned In MAC : 4c:76:25:f5:17:00
No Of MACs : 3
-- Module 1 --
Status : online
Module Type : S6100-MOD-8xETH100-T - 8-port 100GE QSFP28+
18