Release Notes

BIOS (Dell EMC) Boot Selector
S6100 3.25.0.0-6 32 port 100G / 2 port sfp+ mgmt
Booting Primary BIOS
SMF Version 0x12: Last POR=0x11, Reset=0x55
POST Configuration
CPU Signature 406D8
CPU FamilyID=6, Model=4D, SteppingId=8, Processor=0
Microcode Revision 125
Platform ID: 0x10041A57
PMG_CST_CFG_CTL: 0x40006
BBL_CR_CTL3: 0x7E2801FF
Misc EN: 0x840081
Gen PM Con1: 0x203808
Therm Status: 0x88440000
POST Control=0xEA010303, Status=0xE6009F00
BIOS initializations...
CPGC Memtest ................................ PASS
POST:
RTC Battery OK at last cold boot
RTC date Tuesday 05/18/2021 8:49:12
POST SPD test ............................... PASS
POST Lower DRAM Memory test
.... Perf cnt (curr,fixed): 0x1DA77F97A,0x3B4F007C8
POST Lower DRAM Memory test ................. PASS
POST Lower DRAM ECC check ................... PASS
5. After the installation completes, the system displays the following ONIE prompt:
ONIE:/ #
Installing a Third Party Operating System
Apart from the Dell EMC Networking OS, you can also install a supported third party operating system on the S6100-ON system.
For more information on installing a third party operating system, refer to the third party OS vendor's website for OS installation
instructions.
Contacting Dell EMC
NOTE:
If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing
slip, bill, or Dell EMC product catalog.
Dell EMC provides several online and telephone-based support and service options. Availability varies by country and product,
and some services may not be available in your area. To contact Dell EMC for sales, technical support, or customer service
issues:
Go to www.dell.com/support.
27