Users Guide

Table 28. show interface ets detail Command Description (continued)
Field Description
exchange, the Willing bit received in ETS TLVs from the
remote peer is included.
Local Parameters ETS configuration on local port, including Admin mode
(enabled when a valid TLV is received from a peer), priority
groups, assigned dot1p priorities, and bandwidth allocation.
Operational status (local port) Port state for current operational ETS configuration:
● Init: Local ETS configuration parameters were exchanged
with peer.
● Recommend: Remote ETS configuration parameters were
received from peer.
● Internally propagated: ETS configuration parameters were
received from configuration source.
ETS DCBx Oper status Operational status of ETS configuration on local port: match
or mismatch.
State Machine Type Type of state machine used for DCBx exchanges of ETS
parameters:
● Feature: for legacy DCBx versions
● Asymmetric: for an IEEE version
Conf TLV Tx Status Status of ETS Configuration TLV advertisements: enabled or
disabled.
ETS TLV Statistic: Input Conf TLV pkts Number of ETS Configuration TLVs received.
ETS TLV Statistic: Output Conf TLV pkts Number of ETS Configuration TLVs transmitted.
ETS TLV Statistic: Error Conf TLV pkts Number of ETS Error Configuration TLVs received.
The following example shows the show interface DCBx detail command (IEEE).
DellEMC(conf-if-tf-1/17-lldp)#do show interface twentyFiveGigE 1/12 dc d
E-ETS Configuration TLV enabled e-ETS Configuration TLV disabled
R-ETS Recommendation TLV enabled r-ETS Recommendation TLV disabled
P-PFC Configuration TLV enabled p-PFC Configuration TLV disabled
F-Application priority for FCOE enabled f-Application Priority for FCOE disabled
I-Application priority for iSCSI enabled i-Application Priority for iSCSI disabled
-----------------------------------------------------------------------------------------
-
Interface twentyFiveGigE 1/12
Remote Mac Address 00:01:e8:8a:df:a0
Port Role is Manual
DCBx Operational Status is Enabled
Is Configuration Source? FALSE
Local DCBx Compatibility mode is IEEEv2.5
Local DCBx Configured mode is IEEEv2.5
Peer Operating version is IEEEv2.5
Local DCBx TLVs Transmitted: ERPFi
1 Input PFC TLV pkts, 2 Output PFC TLV pkts, 0 Error PFC pkts
0 PFC Pause Tx pkts, 0 Pause Rx pkts
1 Input ETS Conf TLV Pkts, 1 Output ETS Conf TLV Pkts, 0 Error ETS Conf TLV Pkts
1 Input ETS Reco TLV pkts, 1 Output ETS Reco TLV pkts, 0 Error ETS Reco TLV Pkts
The following example shows the show interface DCBx detail command (legacy CEE).
DellEMC(conf-if-tf-1/17-lldp)#do show interface twentyFiveGigE 1/14 dc d
E-ETS Configuration TLV enabled e-ETS Configuration TLV disabled
R-ETS Recommendation TLV enabled r-ETS Recommendation TLV disabled
P-PFC Configuration TLV enabled p-PFC Configuration TLV disabled
282
Data Center Bridging (DCB)