Users Guide

Clearing Audit Logs
To clear audit logs, use the clear logging auditlog command in Exec mode. When RBAC is enabled, only the system
administrator user role can issue this command.
Example of the clear logging auditlog Command
DellEMC# clear logging auditlog
Configuring Logging Format
To display syslog messages in a RFC 3164 or RFC 5424 format, use the logging version {0 | 1} command in
CONFIGURATION mode. By default, the system log version is set to 0.
The following describes the two log messages formats:
● 0 – Displays syslog messages format as described in RFC 3164, The BSD syslog Protocol
● 1 – Displays syslog message format as described in RFC 5424, The SYSLOG Protocol
Example of Configuring the Logging Message Format
DellEMC(conf)#logging version ?
<0-1> Select syslog version (default = 0)
DellEMC(conf)#logging version 1
Setting Up a Secure Connection to a Syslog Server
You can use reverse tunneling with the port forwarding to securely connect to a syslog server.
Management
61