CLI Guide

show crypto ipsec policy
Display the configuration of IPsec authentication and encryption policies.
Syntax show crypto ipsec policy [name name]
Parameters
name name (OPTIONAL) Displays configuration details about a specified policy.
Defaults No default behavior or values.
Command Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.4.2.0 Introduced on the E-Series.
8.3.19.0 Introduced on the S4820T.
Usage
Information
The show crypto ipsec policy command output displays the AH and ESP parameters configured
in IPsec security policies, including the SPI number, keys, and algorithms used.
When configured in a helper-reject role, an OSPFv3 router ignores the Grace LSAs that it receives from a
restarting OSPFv3 neighbor.
Related
Commands
show crypto ipsec sa ipv6– displays the IPsec security associations used on OSPFv3 interfaces.
Example
DellEMC# show crypto ipsec policy
Crypto IPSec client security policy data
Policy name : OSPFv3-1-502
Policy refcount : 1
Inbound ESP SPI : 502 (0x1F6)
Outbound ESP SPI : 502 (0x1F6)
Inbound ESP Auth Key : 123456789a123456789b123456789c12
Outbound ESP Auth Key : 123456789a123456789b123456789c12
Inbound ESP Cipher Key :
123456789a123456789b123456789c123456789d12345678
Outbound ESP Cipher Key :
123456789a123456789b123456789c123456789d12345678
Transform set : esp-3des esp-md5-hmac
Crypto IPSec client security policy data
Policy name : OSPFv3-0-501
1134 Open Shortest Path First (OSPFv2 and OSPFv3)