CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

221

222

223

224

225

226

227

228

229

230

mac access-group

Apply a MAC ACL to traffic entering or exiting an interface. You can apply a MAC ACL on a physical, port-channel, or VLAN

interface.

Syntax

mac access-group access-list-name {in [vlan vlan-range] | out}

To delete a MAC access-group, use the no mac access-group mac-list-name command.

Parameters

access-list-name

Enter the name of a configured MAC access list, up to 140 characters.

NOTE: This option is available only with the keyword in option.

vlan

vlan-range

(OPTIONAL) Enter the keyword vlan and then enter a range of VLANs. The range

is from 1 to 4094 (you can use IDs 1 to 4094).

NOTE: This option is available only with the keyword in option.

optimized Enter the keyword optimized to enable ACL optimization.

in Enter the keyword in to configure the ACL to filter incoming traffic.

out Enter the keyword out to configure the ACL to filter outgoing traffic.

NOTE:

1. If the MAC ACL is applied on VLAN, none of the VLAN members should have an access list applied

for that VLAN.

2. If the MAC ACL is applied on a Physical or Port Channel interface, the VLAN in which this port is

associated should not have an access list applied.

3. If the MAC ACL is applied on a VLAN, then that VLAN should not belong to VLAN ACL group.

4. If the MAC ACL is applied on a VLAN ACL group, then none of the VLANs in that group should

have an access list applied on it.

Defaults none

Command Modes INTERFACE

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

Access Control Lists (ACL) 225