CLI Guide

default-gateway
Assign an IP address as the default gateway for the system.
S6000
Syntax [no] default-gateway ip-address
Parameters
ip-address
Enter the IP address of the gateway router in dotted decimal format (A.B.C.D).
Command Modes BOOT_USER
Command
History
Version Description
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Usage
Information
Use the show default-gateway command to view the current default gateway.
Related
Commands
show_default-gateway— Change the primary, secondary, or default boot image configuration.
etheraddr <macaddr>
Assign the management port MAC address.
S6000
Syntax
etheraddr <macaddr>
Parameters
mac-address
Enter a MAC address in standard format.
Command Modes BOOT_ADMIN
Command
History
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Usage
Information
Use this command to assign a MAC address if FTOS cannot find a default MAC address.
Example
BOOT_ADMIN # etheraddr aa:aa:aa:aa:aa:aa
<Macaddr> XX:xx:xx:xx:xx:xx
No defaults for this
Boot Command Line Interface 339