CLI Guide

Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3(0.0) Added support for multicast MAC address on the MXL platform.
Example
(Multicast)
mac-address-table static 01:00:5E:01:00:01 {multicast vlan 2 output—
range Te 1/2,Te 1/3
ip vlan-flooding
Enable unicast data traffic flooding on VLAN member ports.
Syntax
ip vlan-flooding
To disable, use the no ip vlan-flooding command.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL platforms.
Default Disabled
Usage
Information
By default this command is disabled. There might be some ARP table entries which are resolved through
ARP packets which had Ethernet MAC SA different from MAC information inside the ARP packet. This
unicast data traffic flooding occurs only for those packets which use these ARP entries.
952 Microsoft Network Load Balancing