CLI Guide
Version Description
E-Series legacy
command
Example
DellEMC# show ip multicast-cam stack-unit 1 port 0
Vrf Id Group Address Source Address Vlan Id IPMC index L2 Ports
L3 Ports
-------- --------------- --------------- ------- ------------ ------------
------------
0 224.1.1.1 0.0.0.0 1000 1 gi 1/3,
gi 1/10,
0 224.1.1.2 0.0.0.0 1000 1 gi 1/3,
gi 1/10,
0 224.1.1.1 165.13.34.5 2000 2 gi 1/5,
gi 1/11,
show ip mroute
View the multicast routing table.
Syntax
show ip mroute [vrf vrf-name] [static | group-address [source-address] |
count | snooping [vlan vlan-id] [group-address [source-address]] | summary
| vlt [group-address [source-address] | count]
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to configure
this setting on that VRF.
NOTE: Applies to specific VRF if input is provided, else applies to Default VRF.
static (OPTIONAL) Enter the keyword static to view static multicast routes.
group-address
[
source-address
]
(OPTIONAL) Enter the multicast group-address to view only routes associated with
that group. Enter the source-address to view routes with that group-address and
source-address.
count (OPTIONAL) Enter the keyword count to view the number of multicast routes and
packets.
snooping [vlan
vlan-id
] [
group-
address
[
source-
address
]]
Enter the keyword snooping to display information on the multicast routes PIM-
SM snooping discovers.
Enter a VLAN ID to limit the information displayed to the multicast routes PIM-SM
snooping discovers on a specified VLAN. The VLAN ID range is from 1 to 4094.
Enter a multicast group address and, optionally, a source multicast address in
dotted decimal format (A.B.C.D) to limit the information displayed to the multicast
routes PIM-SM snooping discovers for a specified multicast group and source.
summary (OPTIONAL) Enter the keyword summary to view a summary of all routes.
vlt (OPTIONAL) Enter the keyword vlt to view multicast routes with a spanned
incoming interface. Enter a multicast group address in dotted decimal format
(A.B.C.D) to limit the information displayed to the multicast routes for a specified
multicast group and optionally a source multicast address in dotted decimal format
(A.B.C.D) to limit the information displayed for a specified multicast source. Enter
the keyword count to display the total number of multicast routes with the
spanned IIF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
990 Multicast