Users Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1171

Table Of Contents

Version Description

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.4.(0.0) Added support for VRF.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.8.0 Introduced on the S4810.

Example

DellEMC# show ip ospf 10 timers rate-limit

List of LSAs in rate limit Queue

LSA id: 1.1.1.0 Type: 3 Adv Rtid: 3.3.3.3 Expiry time: 00:00:09.111

LSA id: 3.3.3.3 Type: 1 Adv Rtid: 3.3.3.3 Expiry time: 00:00:23.96

DellEMC#

show ip ospf topology

Display routers in directly connected areas.

Syntax

show ip ospf [process-id] topology

Parameters

process-id

Enter the OSPF Process ID to show a specific process. If no Process ID is entered,

command applies only to the first OSPF process.

Defaults None

Command Modes

● EXEC

● EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.