Users Guide

DellEMC#show run pim
!
ip pim bsr-candidate Loopback 0
ip pim vrf red bsr-candidate Loopback 1
ip pim vrf blue bsr-candidate Loopback 2
ip pim vrf red rp-candidate Loopback 1
ip pim vrf blue rp-candidate Loopback 2
ipv6 pim bsr-candidate Loopback 0
ipv6 pim vrf red bsr-candidate Loopback 1
ipv6 pim vrf blue bsr-candidate Loopback 2
ipv6 pim rp-candidate Loopback 0 100 def_vrf_acl
ipv6 pim vrf red rp-candidate Loopback 1 100 def_vrf_acl
ipv6 pim vrf blue rp-candidate Loopback 2 60 blue_vrf_acl_dut
DellEMC#
Example
(Mapping)
DellEMC#show ipv6 pim rp mapping
PIM Group-to-RP Mappings
Group(s): ff0e::225:1:1:1/128
RP: 100::1, v2
Info source: 200::1, via bootstrap, priority 100
expires: 00:01:50
RP: 150::1, v2
Info source: 200::1, via bootstrap, priority 100
expires: 00:01:50
RP: 200::1, v2
Info source: 200::1, via bootstrap, priority 100
expires: 00:01:57
Group(s): ff0e::225:1:1:2/128
RP: 100::1, v2
Info source: 200::1, via bootstrap, priority 100
expires: 00:01:50
RP: 150::1, v2
Info source: 200::1, via bootstrap, priority 100
expires: 00:01:50
RP: 200::1, v2
Info source: 200::1, via bootstrap, priority 100
expires: 00:01:57
Group(s): ff0e::225:1:1:4/128
RP: 100::1, v2
DellEMC#
show ipv6 pim summary
View information about PIM-SM operation.
Syntax
show ipv6 pim [vrf vrf-name] summary
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to configure
this setting on that VRF.
NOTE: Applies to specific VRF if input is provided, else applies to Default VRF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.11.3.0 Introduced on the Z9100-ON, S4048-ON, S6000-ON, S6100-ON, S4048T-ON,
S3100, S6010-ON, S3048-ON, and C9010.
PIM-Sparse Mode (PIM-SM) 1259