White Papers

Enable status: Disabled
Command Modes CONFIGURATION
Example
DellEMC(conf)#monitor multicast-queue 7
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S6000, Z9500, S6000-ON.
Related
Commands
show running-config monitor session — displays information about monitor configurations.
monitor session
Create a session for monitoring traffic with port monitoring.
Syntax
monitor session session-ID [type { rpm | erpm [set ip dscp dscp_value | set
ip ttl ttl_value]}] [drop]
To delete a session, use the no monitor session session-ID command.
To delete all monitor sessions, use the no monitor session all command.
Parameters
session-ID Enter a session identification number. The range is from 0 to 65535.If you apply
ACLs within the monitor session context, the range is from 0 to 32767.
type Specifies one of the following type:
● rpm
● erpm
rpm Creates a remote port monitoring (rpm) session.
erpm Creates an encapsulated remote port monitoring (erpm) session.
set ip dscp Configures the Differentiated Services Code Point (DSCP) value of the packets in
the Encapsulated Remote Switched Port Analyzer (ERSPAN) traffic. To revert to
the default value, use the no form of this command.
dscp_value DSCP value of the packets in the ERSPAN traffic. The range is from 0 to 63. The
default value is 0.
set ip ttl Configures the IP time-to-live (TTL) value of the Encapsulated Remote Switched
Port Analyzer (ERSPAN) traffic. To revert to the default configuration, use the no
form of this command.
ttl_value IP TTL value of the ERSPAN traffic. The range is from 1 to 255. The default value
is 255.
Port Monitoring 1199