White Papers

Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
The phone numbers may contain country codes, area codes and extensions, if necessary. Allowable
characters are 0 to 9, x, (, ), - and +.
This command is optional for SupportAssist service configuration.
Related
Commands
● preferred-method — configure the preferred method for contacting the person.
preferred-method
Configure the preferred method for contacting the person.
Syntax
preferred-method {email | no-contact | phone]
Parameters
email Enter the keyword email to specify email as preferred method.
no-contact Enter the keywords no-contact to specify that there is no preferred method.
phone Enter the keyword phone to specify phone as preferred method.
Defaults no-contact
Command Modes SUPPORTASSIST PERSON
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Related
Commands
● email-address — configure email addresses to reach the contact person.
● phone — configure phone numbers to reach the contact person.
time-zone
Configure the time zone for contacting the person.
Syntax
time-zone zone +-HH:MM[start-time HH:MM] [end-time HH:MM]
To remove the time zone, use the no time-zone [zone | start-time | end-time] command.
SupportAssist 1573