White Papers

Lines
Beginning
With
Description
System image... Image file name
System Type: System name
Control
Processor:...
Control processor information and amount of memory on processor
128K bytes... Amount and type of memory on system
1 Route
Processor...
Hardware configuration of the system, including the number and type of physical
interfaces available
Example
(Z5048F–ON)
DellEMC#show version
Dell EMC Real Time Operating System Software
Dell EMC Operating System Version: 2.0
Dell EMC Application Software Version: 9-12(1-28)
Copyright (c) 1999-2017 by Dell Inc. All Rights Reserved.
Build Time: Mon Oct 9 01:41:06 2017
Build Path: /build/build01/SW/SRC
Dell EMC Networking OS uptime is 3 day(s), 21 hour(s), 44 minute(s)
System image file is "system://A"
System Type: S5048F-ON
Control Processor: Intel Rangeley with 3 Gbytes (3203256320 bytes) of
memory, core(s) 4.
16G bytes of boot flash memory.
1 54-port TE/TF/FO/FI/HU G (S5048F-ON)
48 Twenty Five GigabitEthernet/IEEE 802.3 interface(s)
6 Hundred GigabitEthernet/IEEE 802.3 interface(s)
upgrade system
Upgrade the system image.
Syntax
upgrade system {flash: | ftp: | scp: | tftp: | usbflash: | stack-unit
{stack—unit—id | all} {A: | B:}
Parameters
stack–unit–id Enter the stack–unit–id to upgrade only the mentioned stack-unit.
all Enter the keyword all to upgrade all the member units of the stack.
ftp: Enter the keyword ftp to follow it with the location of the source file in this
form: //userid:password@hostip/filepath, or press Enter to launch a prompt
sequence.
scp: Enter the keyword scp to follow it with the location of the source file in this
form: //userid:password@hostip/filepath, or press Enter to launch a prompt
sequence.
tftp: Enter the keyword tftp to follow it with the location of the source file in this
form: //hostlocation/filepath, or press Enter to launch a prompt sequence.
flash: Enter the keyword flash to follow it with the location of the source file in this
form: //filepath, or press Enter to launch a prompt sequence.
usbflash: Enter the keyword flash to follow it with the location of the source file in this
form: //filepath, or press Enter to launch a prompt sequence.
File Management 75